Short riser mount really solves the problem of how to mount your accessories. This riser mount is made of all metal and is see thru in design. Another problem solver from the team at David's Collectibles.

Detail Information:

New Gen. Riser Mount for Rifles with Picatinny/Weaver Rail
1.2" Long Picatinny Rail with 2 Slots
Side Plate with Spring Tension for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
1.0" Saddle Height with See-through Design

Spec:

Material: Aluminum
Weight: 1.4 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.2 inch
Width: 1.6 inch
Height: 1.2 inch

UTG Med-Pro Super Compact Riser Mount, 0.83" High, 2 Slots MNT-RS08S2

Detail Information:

New Gen. Riser Mount for Rifles with Picatinny/Weaver Rail
1.2" Long Picatinny Rail with 2 Slots
Side Plate with Spring Tension for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
0.83" Saddle Height with See-through Design

Spec:

Material: Aluminum
Weight: 1.3 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.2 inch
Width: 1.6 inch
Height: 1 inch

UTG Low-Pro Super Compact Riser Mount, 0.5" High, 2 Slots MNT-RS05S2

Detail Information:

New Gen. Riser Mount for Rifles with Picatinny/Weaver Rail
1.2" Long Picatinny Rail with 2 Slots
Side Plate with Spring Tension for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
0.5" Saddle Height with See-through Design

Spec:

Material: Aluminum
Weight: 1.1 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.2 inch
Width: 1.75 inch
Height: 0.7 inch

UTG Hi-Pro Super Compact Riser Mount, 1" High, 3 Slots MNT-RS10S3

Detail Information:

New Gen. Riser Mount for Rifles with Picatinny/Weaver Rail
1.6" Long Picatinny Rail with 3 Slots
Side Plate with Spring Tension for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
1.0" Saddle Height with See-through Design

Spec:

Material: Aluminum
Weight: 1.7 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.6 inch
Width: 1.6 inch
Height: 1.2 inch

UTG Low-Profile Compact Riser Mount, 0.5" High, 3 Slots MNT-RS05S3

Detail Information:

New Gen. Riser Mount for Rifles with Picatinny/Weaver Rail
1.6" Long Picatinny Rail with 3 Slots
Side Plate with Spring Tension for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
0.5" Saddle Height with See-through Design

Spec:

Material: Aluminum
Weight: 1.3 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.6 inch
Width: 1.6 inch
Height: 0.7 inch

UTG Quad-Rail/Single Slot Angle Mount w/QD Lever Mount MNT-MAQ012245

If you are like me you are always trying different positions with you accessories. You have to get lights, laser's, sights and everything else in the best position. This quick release rail mount gives you tons of ways to position accessories. A David's Collectibles great item.

Detail Information:

Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
Innovative Quad Rail Mount for Versatile Accessory Placement at 45 and 90 Degree Angles to Allow for Instant Aiming, Switching Between Iron Sight, Optical Sight, Laser and/or Flashlight
Robust and User Friendly Ergonomic Quick Detach/Lock Lever Mount, Fully Adjustable to Fit on Any Picatinny Rail
Tight Tolerance Control with Anti-rotation Feature to Guarantee Most Positive and Repeatable Zero and Re-zero Capability
Integral Design with Overall Crocodile Profile and Light Weight Machine Cut for Optimal Tactical Applications

Specs:

Material: Aluminum
Weight: 1.8 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 4
Length: 1.78 inch
Width: 2 inch
Height: 1.2 inch

Riser Mount Dual Angle MNT-TBT453

Double 90 and 45 degree 3 slot mount mount. All metal construction fits all picatinny or weaver rails. 1.57" long, .98" tall made of high grade 6061 Aluminum alloy with a hard anodized finish. Common center rail allows this unit to be very versatile in mounting your accessories. Another David's Collectibles problem solver.

Specs:
-Dual Angle Rail
-3 Slot
-1.57" Length
-Black Finish

AR Scope Mount

Triple rail system, see thru, works on any weaver base 5 1/2 in long. Works great on SKS/AK/FAL/Mini 14 and lots more! Use with any style weaver ring, will accept Stanag style scopes.

Riser Mount Quick Release MNT-ARMNT992QD

Riser mount for rail systems, Quick Release operation. Allows you to mount your scopes, red dots and accessories and quickly remove and replace them with the flip of one lever. Mount is all metal, with adjustible lever lock latching mechanism. Black finish and heavy duty construction.

Detailed Information:

Type: AR-15 Riser With Quick Release
Style: 1-Piece
Finish: Black
Pieces: 1
Gun Type: Rifle

Spec:

Rise: 3/4"
Attach: Lever Lock Quick Release
Mount Type: Picatinny Rail/Weaver Style
Length: 5.3"
Material: Aircraft Grade Aluminum

Carry Hangle Tri Rail Mount MNT-ARMNT993TR

Carry handle tri rail mount fits perfectly in the carry handle of your AR rifle. Mount allows you to easily mount accessories on your rifle as well as mounting scopes and dot sights. All metal construction and comes with all necessary hardware to mount to your carry handle. Works with both fixed carry handles and removable handles.

Detail Information:

Creative Mounting Base with Thumb Nut to Sit and Lock Tight onto Any Carry Handle
Clever Picatinny Tri-rails for Flashlight, Laser and Additional Accessory Applications
Additional STANAG Dimension for Most Versatile Applications
Ideal Height, Length and Spacing to Accommodate Most Versatile Applications

Specs:

Material: Aluminum
Weight: 5.8 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 3
Length: 5.2 inch
Width: 1.7 inch
Height: 1.6 inch

Riser Mount 13 Slot 0.5" High MNT-RS05L

You need to get that dot sight or scope up a little, but not too much. This baby does it, it raised your optic up half an inch and mounts easily to your flat top or rail system. Another tickbitesupply.com problem solver!

Detail Information:

Low Profile Riser Mount for Rifles with Picatinny/Weaver Rail
5.7" Long Picatinny Rail 13 Slots and STANAG Feature for Flexible Accessory Application
Clever Retention Thumb Nuts and Locking Plate for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
0.5" Saddle Height with See-through Design

Specs:

Material: Aluminum
Weight: 4.2 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5.70 inch
Width: 1.75 inch
Height: 0.70 inch
MFG# MNT-RS05L

NOTE: The Weaver rail system could have irregular slot placement. Please verify mounting positions of this product against your Weaver rail slots to ensure compatibility before purchase. 80mm between the bars on the bottom of the mount

Riser Mount Medium Profile 13 Slot

Medium Profile Riser Mount for Rifles with Picatinny/Weaver Rail. Length is 5.7" Long Picatinny Rail 13 Slots and has STANAG Feature built into mount. Thumb Nuts and Locking Plate provide for Quick and easy installation. Precision Made from Aircraft Aluminum with Matte Black Anodizing. 0.83" Saddle Height with See-through Design.

Riser Mount 13 Slot 1" High Profile MNT-RS10L

Riser mount works great to get your optics up and over your front sight. This great see thru mount is built to stand up to anything you throw at it. Make of hight grade metal and finished with a beautiful black finish, this is the riser you need in your arsenal. Another David's Collectibles problem solver.

Detail Information:

High Profile Riser Mount for Rifles with Picatinny Rail
5.7" Long Picatinny Rail with 13 Slots and STANAG Feature for Flexible Accessory Application
Clever Retention Thumb Nuts and Locking Plate for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
1.0" Saddle Height with See-through Design

Specs:

Material: Aluminum
Weight: 6.9 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5.7 inch
Width: 1.75 inch
Height: 1.2 inch

NOTE: The Weaver rail system could have irregular slot placement. Please verify mounting positions of this product against your Weaver rail slots to ensure compatibility before purchase.

Rail Mounted Riser MNT-ARMNT995A

You need a little more rise on that scope or dot system on your rifle. Our all metal see thru riser solves the problem. Easily attaches to your flat top giving you 3/4" of rise.

Detailed Information:

Easily attaches to flat top or to any 5" long rail
Thumb screw cinch
See thru Design
All Aluminum Construction

Specs:

Slots: 13
Length: 5.3"
Weight: 5.5 oz
Rise: 3/4"
Finish: Black

Riser Mount Offset Low Height MNT-1R6E8L

Riser mount allows you to mount your optics and fine tune the eye relief by moving the optic closer or further away from your eye. This is an all metal mount and will mount Picatinny or Weaver mounts or rings.

Detailed Description:

Riser mount has a 1/2" rise
Easy installation with thumb screw latch
See thru design
Mount can be mounted in either direction

Specs:

Material: All Metal Construction
Slots: 14
Length of Rail: 5 3/4"
Base Length: 2 1/2"
Finish: Black

Riser Mount Offset High Height MNT-1R6E8

Detailed Description:

Riser mount has a 1" rise
Easy installation with thumb screw latch
See thru design
Mount can be mounted in either direction

Specs:

Material: All Metal Construction
Slots: 14
Length of Rail: 5 3/4"
Base Length: 2 1/2"
Finish: Black

Riser Mount 1" High Short MNT-1RT8

You may need a riser mount, but not a full length model. This mount raises your optic 1" but is only 3 3/8" long. Great for mounting sights and dot sights. Another David's Collectibles problem solver.

Detailed Information:

Made of 6061 Aircraft Grade Aluminum
Mounts Weaver and Picatinny spec accessories
Easy 2 screw rail latch
See thru design

Specs:

Color: Black
Slots: 8
Height: 1"
Length: 3 3/8"
Finish: Hard Anodized

Riser Mount 1/2" High Short MNT-1RT8L

You may need a riser mount, but not a full length model. This mount raises your optic 1/2" but is only 3 3/8" long. Great for mounting sights and dot sights. Another David's Collectibles problem solver.

Detailed Information:

Made of 6061 Aircraft Grade Aluminum
Mounts Weaver and Picatinny spec accessories
Easy 2 screw rail latch
See thru design

Specs:

Color: Black
Slots: 8
Height: 1/2"
Length: 3 3/8"
Finish: Hard Anodized

Click Here to return to top of page
Please change number in box if you want more than one, then click "buy me" and this will carry you to the shopping cart, Then hit the "back" button on your browser to return to buying until you are ready to check out.
Please note-standard shipping price is for Con US only, others will be charged as necessary to cover shipping and handling, if you are going to pay by money order or check please note this on your order and we will hold the order until money order arrives, all checks held two weeks to clear. No returns without a Return Authorization number from us and SHIPPING/HANDLING/INSURANCE charges are not returned, no exceptions.

EMAIL us with questions?

™ Website Design by TICKBITE SUPPLY COMPANY ™
Copyright © 1999-2018 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form.