SKS and AK sling with Web sling and leather tabs on each end, green web new condition. While this sling is original to AK and SKS rifles, it also works great anywhere you have sling swivels. Ruger's, Remington's, Mosin's with synthetic stock, Savage and many others. A David's Collectibles best seller.

Detailed Information:

Sling is original to SKS and AK rifles. Sling adjusts for length and has leather tabs on each end to strap around sling swivel and bezel bar on front. Sling is made for military use and comes ready to install on your rifle.

Specs:

Sling Width: 1 1/8in
Tab Width: 3/4in
Length: Adjustible
Material: Military Web
Tabs: Leather
Color: Green

AK SKS PLA Military Rifle Sling SLI-SKS3

Just in a small batch of original PLA (Peoples Liberation Army) Chinese slings used on SKS and AK rifles. Original stamping on slings, slings are in used but very good condition. Slings have leather tabs on both ends. Take that period SKS or AK back to its military configuration.

Detailed Information:

Slings have been stored for many years but are in overall very good condition. Leather may be dry and need leather conditioner. Slings will have stamped markings, markings will vary in content and darkness as would be expected. Sling tabs loop through the front and rear sling swivel and are adjustable for length with the metal adjuster.

Specs:

Condition: Used Military
Fitment: AK and SKS rifles
Weight: .20 lb
Color: OD Green
Length: 50" Total

Just in, Small Amount

Mauser K98 Sling New Production SLI-MAUK98REP

Great addition to your Mauser K98 rifle. Sling is a new production of the famous German battle sling from WW2. Sling has the correct through the stock frog and adjuster clasps. High quality sling is a great addition to complete your K98 Mauser.

Detailed Information:

Leather sling has the cross hatch pattern in the leather. Rear of the sling has the sling frog to hold the through the stock attachment at the rear. Sling has metal buckle length adjuster and leather keepers.

Specs:

Condition: New Production
Fitment: K98 Mauser, thru stock rear
Weight: .25 lb
Color: Brown
Material: Leather

Military Slings

Mauser 98K Sling Used Surplus SLI-MAU98K

Sling for the Mauser K98 and the Yugo M48 rifles with thru stock provision on stock. Uses what is known as a sling frog to hold the rear of the sling in place and the front loops thru barrel band and adjusts with sling rivet. These military surplus leather slings are in used refurbished condition. Only a small amount are in house and they will go quickly. Complete that Mauser rifle with this original sling. Another David's Collectibles hard to find item!
Please note that the sling frog may be replaced with a new production piece. Color of leather on the sling and sling frog may not match.

Mosin Nagant Russian Military Sling SLI-MOSWEB

Used surplus Russian military sling features green web material and has leather dog collars on each end. These slings complete your Mosin Nagant rifle and fit all models with the sling throught stock configuraton. Slings can be adjusted to length for all models and shooters. This David's Collectibles surplus item will finish off your Mosin with the correct sling. Hurry, very small amount available.

-Web sling
-Includes dog collars with metal buckle
-Adjust to length

Mosin Nagant Rare Dark Blue Sling SLI-MOSWEBBL

From Eastern Europe come these rare Mosin Nagant surplus slings in excellent condition. These slings were used by the Navy, on their small arms. These are in great condition and may show some signs of long term storage. A rare addition to any Mosin Nagant collection Slings are dark blue in color and the leather ends are black. Another tickbitesupply.com best of the best finds, hurry limited supply!

AK SKS Sling Leather Tab Ends Set of 2 SLI-TAB2

Leather replacement ends for many European and Chinese web slings with leather ends. Including SKS, AK and other rifles. Leather tabs come with screw in cinch rivet. Our leather ends are made in the USA. Repair those worn ends on your sling with these great tickbitesupply units.

Detailed Information:

Leather end tabs are appx 5 1/2 inches long and include screw togather rivet. As these are leather items the color may vary from set pictured as no 2 pieces of leather are the same. Does not work with Mosin Nagant slings.

Specs:

Material: Leather
Length: 5 1/2" appx.
width: 3/4" appx.
Includes: Metal Cinch Button
Parts: 2 Leahter Tabs

Sling M1 Carbine Green SLI-M1CARB

Great new sling for your M1 Carbine. Made in the USA by a military contractor with great quality. Complete that M1 Carbine with a nice new sling instead of worn surplus. Another davidscollectibles offering. Also note we offer the oiler which attaches the sling to the buttstock Part number is ACC-MICOILER

Detailed Information:

High quailty sling made in the US by a military contractor to exacting specs. All hardware and materials is correct for this great M1 Carbine sling. Sling is adjustible for length and is made to to loop around the oiler on the rear and the sling bezel on the front.

Specs:

Correct ends and snaps
Nice green web sling material
Made in the USA
Adjusts in length
Width: 1"

M1 Carbine Oiler Tube ACC-MICOILER

The addition you need for your M1 Carbine rifle. Oiler holds oil for field maintance as well as functions as the rear sling attachment. This David's Collectibles item is in unissued condition ready for use

Detailed Information:

Original oiler is all metal with rubber seal to keep oil in tube. Oiler has knurled top cap as well as oil drip rod for pinpoint application of lubricant

Specs:

Item: ACC-M1COILER
Length: 2 1/4"
Weight: .4 oz
Material: Metal

Sling M1 Garand Green SLI-M1GARG

Great new sling for your M1 Garand. Made in the USA by a military contractor with great quality. Complete that M1 Garand with a nice new sling instead of worn surplus. Another David's Collectibles offering

Detailed Information:

Sling is made in the US with correct ends, adjusters and material. Sling is not only correct for the M1 Garnad it is also used on many other applications due to its unique design, quick detach and durability

Specs:

Correct ends and snaps
Nice green web sling material
Made in the USA
Adjusts in Length
Width: 1 1/4"

Sling AR15 Black Silent SLI-AR15BLACK

The AR15 silent sling was produced by the military to be a simple, yet durable sling for the AR Platform. Made of quality web material, this sling loops around both ends of the rifle and by design does not rattle during movement. A great sling for not only the AR platform, but any application where you need a quality two point sling

Detailed Information:

Sling is made of 1 1/4" wide military webbing with 2 adjusters for cinching and adjusting length. Sling is black in color with 2 adjusters

Specs:

Width: 1 1/4"
Color: Black
Length: Adjustible
Manufactured in USA

Click here To return to top of Page

Tactical Slings

Sling Strap Multi Use SLI-150009

Sling strap for weapons of many styles and great for strapping equipment. Strap is made of military nylon and has two adjusters for length. Strap is 1" wide and can be adjusted from appx 23" to 46" in length.

Detailed Information:

Great strap for many uses. Can be used as a sling on any weapon with sling swivels on each end. Can also be used as a strap for your gear. Great with walking sticks, monopods, tent use and gear attachment to your tactical gear.

Specs:

Condition: New
Weight: .05 lb
Color: Black
Material: Nylon

Single Point Tactical Sling With Pad SLI-TBT001

Single point sling has all the features you need as well as a shoulder pad. Everyone wants to sell you a sling, but few offer a padded shoulder as part of the strap. Sling features a metal hook with a slide down anti rattle collar to protect your weapon and allow you to be quiet in the night. Sling has four adjustment points allowing you to angle your weapon to your needs. Shoulder pad can be slid to most comfortable position reducing fatigue. A TBT Tactical product offered by David's Collectibles.

Features:

Color: Black
Material: High Quality Waterproof Nylon
Size: 1 1/2" Wide 54" full length
Adjustable: Yes, 4 adjusters

Need more info, call us
1-252-746-2040

Sling 3 Point Tactical SLI-ATSSBLK

US Military Sling system with Emergency Quick Release. Made int the USA, this sling is new in the package ready to go to work. Another tickbitesupply.com military surplus find!
• Compatible with M16A2, Rifle, M-4 Carbine, M16A4 Rifle, and the Joint Service Combat Shotgun
• Long enough to suspend the weapon across the body (back and front) when carried by Combat equipped Military
personnel Versatile enough to be shortened as needed for normal weapons carry when not in a tactical posture • Capable to be used ambidextrously
• The First Line Combat Assault sling is a 1 1/2" wide webbing composed of polypropylene and nylon based materials.
• The 1” side-release buckle, 1 1/2" emergency release buckle, tri-glides (all hardware) are made of nylon and are US made material
• The sling has a side release ( to adjust the length of the sling) and an emergency release buckle or ERB. (to allow the user to separate the sling and weapon from the body an emegerency situation)
• Includes mounting hardware made of polypropylene and nylon based material with a break strength of 550lbs and temperature tolerance of 300 degrees.
• US military approved and issued, this is a one time purchase

Tactical 2/1 Point Sling With Bungee SLI-TBT

Combination single and double point Tactical sling. Brand new Tickbite Tactical© Heavy duty sling. Sling features metal quick release ends, bungee feature on both ends, quick detach weapon drop on each end. We built metal D hooks on each end of sling to easily convert to a single point sling. We also built in QD covers to keep sling clip's from rattling when clipped to metal hooks! With these features you would expect to pay much, much more. The Tickbite Supply© advantage! Also see our SLI-TBTA cinch adapter available below.

Detailed Information:

Heavy duty military grade sling features metal clips with anti rattle collars. Web sling is made of heavy material. Sling features bungee ends so the sling works with you instead of fighting you as you aim. Sling has QD clips on each end allowing you to release your weapon quickly.

Specs:

Width: 1 1/4"
QD Buckles: Reinforced Duraflex
Clips: Steel HK Style
Configuration: 2pt/1pt
Length: Adjustible
Color: Black

Tactical 2/1 Point Tan Sling With Bungee SLI-TBTT

Detailed Information:

Specs:

Width: 1 1/4"
QD Buckles: Reinforced Duraflex
Clips: Steel HK Style
Configuration: 2pt/1pt
Length: Adjustible
Color: Tan

Quick Detach Single Point Tactical TBT™ Sling

Single point Tactical TBT sling. Brand new Tickbite Tactical© TBT Heavy duty sling. Sling features metal quick release end, bungee feature on end, quick detach weapon drop on end. Sling features heavy duty triangle connector for quick sling operation. We also built in QD cover to keep sling clip from rattling when clipped to metal hooks! With these features you would expect to pay much, much more. The Tickbite Supply© advantage! Also see our SLI-TBTA1 cinch adapter available below.

Sling 3 Point Rifle Sling SLI-GB501

Finally a sling that does it all. Fully adjustible 3 point rifle sling can be used with back, front or on ready position. Sling has multiple hook up options to make this offering from Davids Collectibles a best rated product. Works great with fixed stocks and collapsible stocks as well as others with the included ends.

Detailed Information:

Fully Adjustable with Non-slip Grip and Excellent Quality Metal Snap Hook. Easy Adjustment Provides Different Lengths for Various Shooting Positions. Allows For Quick and Smooth Actions in Response to Field Scenarios. Versatile Straps with Separate Adaptable Strap Loops Offer Various 360o Degree. Non-interfering Ways to Carry Weapon at Battle-ready Positions. Great for Close Encounter and Battlefield Operations.

Specs:

Weight: 0.5 lb
Material: PP Webbing
Color: Black

Click here To return to top of Page

Hunting Slings

Allen Padded Rifle Sling 1" Ends SLI-85

Product Info:
Great multi purpose rifle and shotgun sling with sholder pad for comfort. Made of rugged Endura fabric with a 3/8" thick foam shoulder pad. Strap is made of heavy web construction. Adjustable in length for shooters comfort. Great comfort in a dependable sling.

Click here To return to top of Page

Sling Accessories

Stud Mount Accessory Rail MNT-SSA

You have a sling swivel stud, but you need to use a rail mounted accessory. This great item converts the stud to a rail mount. Easy installation allows you to insert mount to stud, tighten wedge plate and install you favorite bipod, grip, light or laser!

Detailed information:

Metal mount with anti scratch back surface
Easy do it yourself installation, tools included
Hard anodized black finish

Specs:

Slots: 5
Length: 2 1/4"
Finish: Black

NEW! Sling Swivel 1" loop QD push button

QD sling swivel push botton release for 1" sling. Made of high strength steel with black finish. Presicion made for proper fit on stocks or rails with QD swivel mount.

Sling Swivel Quick Detach SLI-SS125

Tickbite Tactical™ Sling swivel QD attaches to any standard sling swivel stud. Thumb screw installation and removel allow placement without tools. Fits all slings up to 1.25" wide and is made in the USA of the finest available materials. Another tickbitesupply.com best of products, built for the long haul. Need 2 of these swivels, order our SLI-SS125X2 set of 2
Features:

-Pack of 1
-All metal construction
-Thumb Screw Installation
-Made in USA

Sling Swivel Set Quick Detach SLI-SS125X2

Sling swivel QD attaches to any standard sling swivel stud. Thumb screw installation and removel allow placement without tools. Fits all slings up to 1.25" wide and is made in the USA of the finest available materials. Another tickbitesupply.com best of products, built for the long haul.
Features:

-Pack of 2
-All metal construction
-Thumb Screw Installation
-Made in USA

Rail Bipod/Sling Adapter For Stud Mount MNT-HARADAP

You bipod mounts to a stud, but you have a rail. This handy little adapter easily handles this, it mounts to your Weaver or Picatinny rail and gives you the needed stud for your bipod. Also allows rail mounting of your favorite sling with our SLI-SS125 sling swivel. Another David's Collectibles problem solver.

Detainled Information:

Easily mounts to your Picatinny or Weaver spec rail
Allows you to mount your bipod or sling swivel
Solid mounting with slot stud

Specs:

Finish: Black Hard Anodized
Length: 2"
Stud Type: Sling Swivel Style

TBT™ Sling Adapter Cinch 1"x12"

Wow, what a reception our new TBT slings are having. We set out some time ago to offer a few versions of our heavy duty TBT™ series of slings and then add optional ends allowing you to configure the sling to your needs. Not sell you a sling with a box of ends that you will never use. The first in this series of ends is our SLI-TBTA1. This unit is a direct clip in to either of our TBT slings and gives you a 1" wide by 12" length web strip to secure to stocks, sling swivels, and web gear. And as with all our TBT™ gear, unit clips into sling for quick release or attchment. Made in the USA with American workers!

Allows use of the TBT™ on many weapons including AR's, AK's, SKS, Mini's, Shotguns, HK's and many, many others!

TBT™ Sling Swivel Adapter

Wow, what a reception our new TBT slings are having. We set out some time ago to offer a few versions of our heavy duty TBT™ series of slings and then add optional ends allowing you to configure the sling to your needs. Not sell you a sling with a box of ends that you will never use. The second in this series of ends is our SLI-TBTA2. This unit is a direct clip in to either of our TBT slings and gives you a 1" wide leather loop end. Allows attachment to sling swivels, and AK and SKS bands. And as with all our TBT™ gear, unit clips into sling for quick release or attchment. Made in the USA with American workers!
Allows use of the TBT™ on many weapons including AR's, AK's, SKS, Mini's, Shotguns, HK's and many, many others!

Sling Swivel Stud 10-32 Fine Thread

Tickbite Tactical™ Sling Swivel Stud with 10-32 thread pitch. Use with either Quick Detach Sling Swivel above. Also see our Stud spacer SLI-SRNG1032 below.

Sling Swivel Stud Spacer 10-32 Fine Thread

Tickbite Tactical™ Sling Swivel Stud Spacer with 10-32 thread pitch. Use with our SLI-STD1032 threaded stud to set the depth of the stud in the stock or Shotgun Cap.

Sling Swivel Stud 12-16 Coarse Thread

Tickbite Tactical™ Sling Swivel Stud with 12-16 thread pitch. Use this in wood or synthetic stocks. Simply drill hole smaller than stud and screw stud in. Use with either Quick Detach Sling Swivel above.

Sling Swivel Quick Detach Deep Housing SLI-QDSW28

Quick release push button sling swivel for slings up to 1.25" width. Heavy duty unit is for deep housing reciever holds. Another great tickbitesupply item
Detail Information:
• Made from High Strength Steel with Black Finish
• Extended Ball Bearing Distance for Optimal Fit with 4mm Deep Housing
Spec:
Material: Steel
Weight: 0.9 oz
Color: Black

Rail Mount QD Swivel Mount SLI-ARSSR5

Great problem solver for your push button QD sling swivel. Mounts securely to your Picatinny or Weaver rail allowing you to use Quick Release sling swivel such as our SLI-TTQD

Detailed Information:

All metal construction, mount is able to accept your ball lock quick release sling swivel. Thru screw keeps mount from walking on the rail and easy to use screw slot tightening. Unit has a black finish to complete your tactical package. Note that this is the mount only, does not include the Quick Release sling swivel, we have these availible.

Specs:

Material: Aluminum/Steel
Finish: Black
Size: 1 1/8 x 1/2 x 3/4"

Rail Mounted Sling Adapter with TBT Sling Quick Detach Loop

Great new item by TBT Tactical™. Sling mount attaches securely to any Weaver or Picatinny rail. Has provisions for looping a sling through the slot or use a quick detach sling with the QD loop. TBTARSSR2 works great with our TBT sling. All metal construction.

Sling Swivel Rail Mounted SLI-ARSSR

How can you mount your sling with your new quad rail? Easy fix, install our rail mounted sling swivel and you are ready to go. Easily mounts on any Picatinny or Weaver rail. Holds slings up to 1.25" wide as well as clip on slings.

Detailed Information:

Rail mounted sling swivel fits Picatinny or Weaver rails. Loop is 1.25" wide allowing unit to be used on military or non military slings. Made of all metal rail mounted swivel will be with you when it gets rough. Unit can attach on bottom, side or top rails depending on your needs.

Specs:

Color: Black
Loop size: 1.25"
Material: Steel/Aluminum
Attachment: Screw

Rail Mount Sling Attachment

Great new item! Picatinny rail mount sling swivel. Fits and locks on any Picatinny rail. Handles any sling with Quick Detach hook. Heavy duty metal construction for hard use! Use with our SLI-ACC-TBT sling as well as others

AR Bayonet Lug Mount and Sling Plate

Another new item. Mounts to your AR or M16 bayonet lug and gives you a rail for bipods, laser's or lights. Also features ambidextrous mounting poings on each side for sling, both quick detach and loop thru sling. All metal construction for years of hard use!

Sling Attachment Plate for the Model 4 STK-ARSLD

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this ambidextrous attachment point.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows looping of sling either left or right. Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Sling Attachment Plate for the Model 4 STK-ARSLD2

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this ambidextrous attachment point.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows attachment of single point sling either left or right. Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Sling Attachment Plate for the Model 4 STK-ARSLD4

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this single point attachment plate.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows attachment of single point on your rifle Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Sling Attachment Plate for the Model 4 STK-ARSLD5

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this single point attachment plate.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows attachment of single point sling on your rifle. Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Another NEW product!

Sling Swivel Kit For AR Plastic Handguards

Sling Swivel, washer, nut and stud for AR poly handguard. Also includes hardware to mount on AR15 Mil Spec handguards. Handles any sling 1.25 in wide or less. A new item we have had a lot of demand for! Just in time, we work hard for our customers!

Stud Kit For AR Plastic Handguards

Stud kit fits through the existing holes on AR plastic handguards through the existing holes. Allows mounting of stud mount bipods, sling swivels and more. Great addition to your AR rifle. Purchase our SLI-SS125 sling swivel to mount sling to this unit. Another great TBTtactical™ USA made product.

QDSW28 Deluxe QD Swivel

Quick Release 1-1/4" Sling Swivel designed for the MNTBR101TR Barrel Mount Tri Rail! Picture shows Swivel on our MNTBR101TR Tri Rail. Also use in any rails or stocks with QD receiver hole.

AK Pistol Grip Sling Plate SLI-TBTDRACO

Your AK Pistol needs a single point attachment, but no way to do it. This TBT item solves that problem. Simply remove your pistol grip, install the plate, re-install the grip and your single point sling clips to the plate. Ambidextrous design allows for both right handed and left handed shooters.

Detailed Information:

Plate is made of steel for years of use. Looks allow for the attachment of single point slings such as our SLI-TBT002B or our SLI-TBT. Easy installation. Note that on some PAP Pistols with a rivet under the plate you may need to notch the plate to install. An easy operation. Used the same grip screw, no modifications to the weapon.

Specs:

Material: Steel
Finish: Black
Fitment: Single Point Slings
Configuration: Ambidextrous Design

Mauser K98 Repro Sling Frog SLI-MAUFROG

Great replacement sling frog for your K98 sling. This is a high wear item and our units look and work great. This is the piece that holds the sling in the cut out on the butt stock. This quality unit from David's Collectibles will give you years of great service, just as the K98 Mauser

Click Here to return to top of page
Please change number in box if you want more than one, then click "buy me" and this will carry you to the shopping cart, Then hit the "back" button on your browser to return to buying until you are ready to check out.
Please note-standard shipping price is for Con US only, others will be charged as necessary to cover shipping and handling, if you are going to pay by money order or check please note this on your order and we will hold the order until money order arrives, all checks held two weeks to clear. No returns without a Return Authorization number from us and SHIPPING/HANDLING/INSURANCE charges are not returned, no exceptions.

™ Website Design by TICKBITE SUPPLY COMPANY ™
Copyright © 1999-2023 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form.