Great new item, pistol grip for the Remington 870 shotgun. Fits the 870 and features 3 shot saddle and bufer tube adapter built in. This great item can be used alone as a pistol grip, or you can install our Buttstock assembly STK-TBTAR6POSB, or your favorite AR stock for an adjustible stock and pistol grip. Set includes pistol grip, bolt and washer. See our sling cap kit below.

Detailed Information:

Pistol grip easily installs on your Remington shotgun. Made of tough military grade polymer, this great pistol grip comes with included hardware and allows you to mount your favorite AR stock if desired. Can be used as a stand alone pistol grip. Note: If mounting a stock you will need the stock, stock tube and castle nut. You will not use buffer, buffer spring or plate as used on AR type rifles. Easy installation and a great way to personalize your Shotgun!

Specs:

Part Number: STK-R870P1
Color: Black
Material: Military Grade Polymer

Shotgun Pistol Grip Sling Cap STK-SHOPLG2

Pistol Grip Sling Cap fits our STK-MOSPG1 or STK-R870PGI Pistol grip and allows you to clean up the look and have a sling swivel. This cap is designed to screw into the rear of the pistol grip with provisions for a stock tube. Easily screws into the opening and is machined to accept the included SLI-TTQD quick detach sling swivel. Note that this is the metal cap and sling swivel only.

Detailed Information:

All metal cap is machined to accept screw into the end of our shotgun pistol grips. Allows for the addition of included quick detach sling swivel. Unit is black in color.

Specs:

Fitment: Shotgun Pistol Grip
Color: Black
Material: Metal
Weight: 1 oz
Includes: Cap and Swivel

Shotgun Hunting Stock Set AHS0100B

Great new stock set for Shotguns! Adjustable four position buttstock. Adjustable neoprene cheekrest for added comfort. Recoil Reducing Buttpad with non-slip surface. Ergonomic forend design with non slip texture. Made in the US.
Fits 12 Gauge & 20 Gauge Mossberg 500 & 590,Remington 870, Winchester 1200 & 1300 and Maverick 88. (note: synthetic forends on new Mossburg 500A can not be replaced because action bars are attached to the forend). Black in color
Also available in Camo patten

Click here to return to top of Page

Shotgun Butt Stocks

Remington 7600 Top Folding Stock

Remington Products for Pump Action and Semi Rifles! FITS: Remington 7600, 7615, 760, 7400 and 740 in all Calibers Remington 7600 Top Folding Buttstock Stock. Note that the shotguns and forends are pictured for demonstration only, you are purchasing a buttstock only.

Remington 7600 Tactical Buttstock with Free Buttpad

Remington Products for Pump Action and Semi Rifles! FITS: Remington 7600, 7615, 760, 7400 and 740 in all Calibers Remington 7600 Tactical buttstock with Free Buttpad. Note that the shotguns and forends are pictured for demonstration only, you are purchasing a buttstock only.

Remington 20 Ga Talon Tactical Shotgun Stock with Scorpion Recoil System

Six Position Adjustable Stock with Scorpion Recoil System.
-Scorpion Razorback Recoil Pad – Non-SSlip, Removable/Scorpion Recoil Pistol Grip – Ergonomic, Sure-Grip Texture
-Impact is Absorbed – Shooting any Loaad Size can now be Done with No Pain being Transferred to the Shooter
-Reduces the Challenge of Reacquiring thhe Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals/Remains Flexiible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoill/Removes Limitations from Spring and Piston Type Recoil Suppression System
•Triton Mount System
-Constructed of Military Type III Anodizzed, 6061 T6 Aluminum
-Securely Fasten your ATI Tactical Stockk or Rear Pistol Grip with no Specialized Tools
-Angled, Self-Aligning Dovetail Locking System for Easy, Secure Installation
-Interchangeable Sling Mount Locations ffor Left and Right-Handed Shooters
-Additional Spacer for when Sling Mount is Not in use
•3M Industrial Grade Self-Adhesive Soft Touc Cheekrest Pad/•Removable/Adjustable Cheekrest
•DuPont® Extreme Temperature Glass Reinforced Polymer Stock
•Manufactured in the USA/Limited Lifetime Warranty
Fits Most 20 GA Remington 870 Shotguns

Remington 7600 Pistol Grip Buttstock

Remington Products for Pump Action and Semi Rifles! FITS: Remington 7600, 7615, 760, 7400 and 740 in all Calibers Remington 7600 Pistol Grip Buttstock. Note that the shotguns and forends are pictured for demonstration only, you are purchasing a buttstock only.

Click here to return to top of Page

Shotgun Forends

Shotgun Metal Forend For Remington 870 MNT-SHOHGRM87A

Metal forend for the Remington 870 shotgun, all metal. Unit is designed for extreme use and will accept our MNT-P503 Rail set which is offered below. Unit is a direct replacement for your wood or polymer handguard. Fits Remington 870 and compatible shotguns.

Detail Information:

Fits Remington 870 Shotgun 12 Ga. and Compatibles
Made from Aircraft Aluminum with Matte Black Finish
Adopts Original Dimensions and Tolerance for Best Fit
Combat Rated Ergonomic Features for Full Power Cocking to Carry Out Most Critical Missions
Innovative Picatinny Rail Housing Ready for Additional Rails & Accessories

Specs:

Material: Aluminum
Weight: 11.3 oz
Pieces: 1
Length: 7.5 inch
Width: 1.7 inch
Height: 1.7 inch

Rail Set 3 Piece HK G36 MNT-P503

Three piece rail sections developed for the Model 36 HK. These 3 sections can also be used for your custom builds on many firearms, giving you quality rails at discount prices.

Detail Information:

Two 3 7/8" Picatinny Rails Each with 7 Numbered Slots, and One 6" Picatinny Rails with 13 Numbered Slots
2 Screw Holes on Each Rail
Complete with 7 Hex Screws and Allen Wrench

Specs:

Material: Aluminum
Weight: 4.2 oz
Pieces: 3
Rail Type: Picatinny/Weaver
No. of Rails: 3

Shotgun Forend With 2 Rails

Tactical Shotgun Picatinny Rail Package
One Left 2" Picatinny Rail
One Right 2" Picatinny Rail
•Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories
•Blank Inserts for When Rails are Not in Use
•Textured Forend
•Very Tough, yet Extremely Lightweight
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns
Note *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.
Special note: See upgrade metal rail sections for this stock under Shotgun Stock Accessories on this page!

Shotgun Polymer Fore End

12GA Shotgun Standard Forend No jamming! Designed NOT to overlap the shotgun's receiver when cycling the pump action. Eliminates the chance of a momentary jam by a sling, clothing or other material catching between the standard forend and the receiver. Features recessed, pebble-grain, textured area which reduces the chance of hand sliding from grip. Includes adapters to fit 12 gauge Mossberg 500/590 /835, Remington 870, Winchester 1200/1300 and Norinco 98 servies pump shotguns without gunsmithing! (Will not fit Maverick.) Made from indestructible, black, glass-filled nylon. Unconditional Lifetime Warranty. Patent Pending. No modification necessary.
Note: The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 1/4 Inches are Required for use of this Product

Click Here to return to top of page

Shotgun Stock Accessories

Stock Slip On Recoil Pad Small STK-15511

Great new item from tickbitesupply, slip on recoil pad for small shotguns and rifles with straight stocks. Reduces felt recoil to protect that shoulder and help with accuracy. Appx 5 1/4" from top to bottom, unit stretches over butt stock.

Detailed Information:

Easy slip on design, stays put when installed. Provides a non slip surface while greatly reducing felt recoil. A great David's Collectibles problem solver.

Specs:

Reduces felt recoil up to 70%
Easy to install
Uses the latest high tech recoil reducing polymer
High performance recoil reduction at a fraction of the cost of other performance brands

Shotgun Strikeforce Aluminum Rail Set

Designed for use with the above RI-STK-SHOTSG0100B stock set, this is the metal rail set (heat treated aluminum) to replace the polymer set included with the stock kit. Use for extreme heavy duty use, police, military, or just for those that want the best.

ATI Rail Section Aluminum 2" Left MNT-A.5.10.2010

Upgrade your polymer rail section with this heat treated billet aluminum rail section. Fits the Left side of ATI forend for TSG0100 Kit and TSG0300 Forends.

Detailed Information:

Fits Stock Kit: Our part number STK-SHOTGS0100B stock set.
Fits Forend: Our number STK-SHOTSG0300.
This is the Left rail only with mounting hardware
Fits ATI's Tactcial Forend for Mossberg 535/500/590/835, Remington 870, and Winchester 1200/1300 Shotguns

Specs:

Military Type III Anodized, 6061 T6 Aluminum
Mount all of Your Favorite Accessories
Loctite on Screws
Manufactured in the USA
Limited Lifetime Warranty
Four Slots

ATI Rail Section Aluminum 2" Right MNT-A.5.10.2020

Upgrade your polymer rail section with this heat treated billet aluminum rail section. Fits the right side of ATI forend for TSG0100 Kit and TSG0300 Forends.

Detailed Information:

Fits Stock Kit: Our part number STK-SHOTGS0100B stock set.
Fits Forend: Our number STK-SHOTSG0300.
This is the right rail only with mounting hardware
Fits ATI's Tactcial Forend for Mossberg 535/500/590/835, Remington 870, and Winchester 1200/1300 Shotguns

Specs:

Military Type III Anodized, 6061 T6 Aluminum
Mount all of Your Favorite Accessories
Loctite on Screws
Manufactured in the USA
Limited Lifetime Warranty
Four Slots

ATI Rail Section Set Aluminum 2" MNT-A.5.10.2060

Upgrade your polymer rail section with this heat treated billet aluminum rail set. Fits the ATI forend for TSG0100 Kit and TSG0300 Forends.

Detailed Information:

Fits Stock Kit: Our part number STK-SHOTGS0100B stock set.
Fits Forend: Our number STK-SHOTSG0300.
This is the left and right rail with mounting hardware
Fits ATI's Tactcial Forend for Mossberg 535/500/590/835, Remington 870, and Winchester 1200/1300 Shotguns

Specs:

Military Type III Anodized, 6061 T6 Aluminum
Mount all of Your Favorite Accessories
Loctite on Screws
Manufactured in the USA
Limited Lifetime Warranty
Four Slots

Click Here to return to top of page
Please change number in box if you want more than one, then click "buy me" and this will carry you to the shopping cart, Then hit the "back" button on your browser to return to buying until you are ready to check out.
Please note-standard shipping price is for Con US only, others will be charged as necessary to cover shipping and handling, if you are going to pay by money order or check please note this on your order and we will hold the order until money order arrives, all checks held two weeks to clear. No returns without a Return Authorization number from us and SHIPPING/HANDLING/INSURANCE charges are not returned, no exceptions.

™ Website Design by TICKBITE SUPPLY COMPANY ™
Copyright © 1999-2018 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form.